SCI时时刷

search
+
Effect of different intraoral scanning strategies on the marginal and internal fit of CAD-CAM inlay restorations: An in vitro study
Effect of different intraoral scanning strategies on the marginal and internal fit of CAD-CAM inlay restorations: An in vitro study
Statement of problemWhether the scanning strategy of intraoral scanners (IOSs) affects the accuracy of the digital recordi...
Effects of design software program and manufacturing method on the marginal and internal adaptation of esthetic crowns for primary teeth: A microcomputed tomography evaluation
Effects of design software program and manufacturing method on the marginal and internal adaptation of esthetic crowns for primary teeth: A microcomputed tomography evaluation
Statement of problemThe adaptation of digitally produced crowns is affected by the design software program and manufacturi...
Accuracy and surface roughness of Co-Cr partial denture frameworks with different digital fabrication methods
Accuracy and surface roughness of Co-Cr partial denture frameworks with different digital fabrication methods
Statement of problemTraditional removable partial denture (RPD) manufacture is being phased out in favor of computer-aided...
Comparative analysis of flexural strength of 3D printed and milled 4Y-TZP and 3Y-TZP zirconia
Comparative analysis of flexural strength of 3D printed and milled 4Y-TZP and 3Y-TZP zirconia
Statement of problemThe mechanical properties of 3 dimensionally (3D) printed zirconia have been reported to be comparable...
Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods
Staining and bleaching susceptibility of zirconia-reinforced lithium silicate glass-ceramics with different thicknesses, translucencies, and fabrication methods
Statement of problemThe influence of different thicknesses, translucencies, and fabrication methods on the spectrophotomet...
Letter to the Editor regarding “Semiautomated fabrication of a custom orbital prosthesis with 3-dimensional printing technology” by Kim S-H et al.
Letter to the Editor regarding “Semiautomated fabrication of a custom orbital prosthesis with 3-dimensional printing technology” by Kim S-H et al.
Cookies are used by this site. Cookie SettingsAll content on this site: Copyright © 2024 Elsevier B.V., its licensors, an...
Response to Letter to the Editor regarding, “Semi-automated fabrication of a custom orbital prosthesis with 3-dimensional printing technology”
Response to Letter to the Editor regarding, “Semi-automated fabrication of a custom orbital prosthesis with 3-dimensional printing technology”
Cookies are used by this site. Cookie SettingsAll content on this site: Copyright © 2024 Elsevier B.V., its licensors, an...
Shear bond strength of adhesive cement to zirconia: Effect of added proportion of yttria for stabilization
Shear bond strength of adhesive cement to zirconia: Effect of added proportion of yttria for stabilization
Available online 2 March 2024Author links open overlay panel, AbstractStatement of problemZirconium dioxide (zirconia) can...
Effect of surface roughness and biofilm formation on the color properties of resin-infiltrated ceramic and lithium disilicate glass-ceramic CAD-CAM materials
Effect of surface roughness and biofilm formation on the color properties of resin-infiltrated ceramic and lithium disilicate glass-ceramic CAD-CAM materials
Statement of problemComputer-aided design and computer-aided manufacturing (CAD-CAM) materials have become popular for den...
Survival, complications, and patient-reported outcomes of endodontically treated teeth versus dental implant-supported prostheses: A systematic review
Survival, complications, and patient-reported outcomes of endodontically treated teeth versus dental implant-supported prostheses: A systematic review
Chanakarn Sinsareekul: Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Visualizat...
Identifying an optimal approach for the placement of pterygoid implants: A 3D finite element analysis
Identifying an optimal approach for the placement of pterygoid implants: A 3D finite element analysis
Statement of problemA consensus on the optimal approach to the placement of pterygoid implants is lacking.PurposeThe purpo...
Fabrication of digital complete dentures guided by facial scanning with a device for recording the maxillomandibular relation: A dental technique
Fabrication of digital complete dentures guided by facial scanning with a device for recording the maxillomandibular relation: A dental technique
Available online 4 March 2024Author links open overlay panel, , , AbstractThis article describes a technique for the fabri...
Complete mouth rehabilitation in a patient with condylar fracture malunion: A clinical report
Complete mouth rehabilitation in a patient with condylar fracture malunion: A clinical report
Available online 4 March 2024Author links open overlay panel, , , , AbstractMandibular condyle fracture malunion and tooth...
Effect of coffee thermocycling on the color and translucency of milled and 3D printed definitive restoration materials
Effect of coffee thermocycling on the color and translucency of milled and 3D printed definitive restoration materials
Available online 4 March 2024Author links open overlay panel, AbstractStatement of problemResearch on the color and transl...
Influence of connected and nonconnected calibrated frameworks on the accuracy of complete arch implant scans obtained by using four intraoral scanners, a desktop scanner, and a photogrammetry system
Influence of connected and nonconnected calibrated frameworks on the accuracy of complete arch implant scans obtained by using four intraoral scanners, a desktop scanner, and a photogrammetry system
Statement of problemDifferent techniques have been proposed for increasing the accuracy of complete arch implant scans obt...
In vitro damping and strain distribution for implant-supported crowns using 5 different CAD-CAM crowns and 3 different luting cements
In vitro damping and strain distribution for implant-supported crowns using 5 different CAD-CAM crowns and 3 different luting cements
Statement of problemDental implants are particularly susceptible to occlusal overloading because, unlike natural teeth, th...
Interdisciplinary treatment for an adolescent with fusion of the left maxillary lateral and central incisors: A clinical report
Interdisciplinary treatment for an adolescent with fusion of the left maxillary lateral and central incisors: A clinical report
Available online 9 December 2023Author links open overlay panel, , , AbstractThe interdisciplinary treatment provided for ...
A digital technique for cloning the emergence profile of the interim to the definitive implant-supported restoration
A digital technique for cloning the emergence profile of the interim to the definitive implant-supported restoration
Available online 7 December 2023Author links open overlay panel, , , AbstractThe subgingival contour of implant-supported ...
A modified reverse impression technique for capturing and transferring soft-tissue information
A modified reverse impression technique for capturing and transferring soft-tissue information
Available online 7 December 2023Author links open overlay panel, , , ABSTRACTThe reverse impression technique consists of ...
Treatment of a severely compromised endodontically treated tooth with a 2-piece premanufactured glass-fiber post: A clinical report
Treatment of a severely compromised endodontically treated tooth with a 2-piece premanufactured glass-fiber post: A clinical report
Available online 5 December 2023Author links open overlay panel, , , , , , ABSTRACTA 2-piece premanufactured glass-fiber p...
Comparative analysis of the retention force and deformation of PEEK and PEKK removable partial denture clasps with different thicknesses and undercut depths
Comparative analysis of the retention force and deformation of PEEK and PEKK removable partial denture clasps with different thicknesses and undercut depths
Available online 5 December 2023Author links open overlay panel, , , , , AbstractPurposeThe purpose of this in vitro study...
Application of 3D digital smile design based on virtual articulation analysis in esthetic dentistry: A technique
Application of 3D digital smile design based on virtual articulation analysis in esthetic dentistry: A technique
Available online 6 December 2023Author links open overlay panel, , , AbstractA technique for the application of a virtual ...
Influence of intraoral scanning duration on data accuracy
Influence of intraoral scanning duration on data accuracy
Available online 7 December 2023Author links open overlay panel, , , , , , ABSTRACTStatement of problemThe use of intraora...
Prediction of primary stability via the force feedback of an autonomous dental implant robot
Prediction of primary stability via the force feedback of an autonomous dental implant robot
Available online 7 December 2023Author links open overlay panel, , , , ABSTRACTPurposeThe purpose of this in vitro study w...
Accelerated denture base festooning using a free 3D modeling computer program: A dental technique
Accelerated denture base festooning using a free 3D modeling computer program: A dental technique
Available online 4 December 2023Author links open overlay panel, , Section snippetsTechnique1.Import the digital file of t...
Crestal strain of two-implant mandibular overdentures with implants placed at different positions: An in vitro 3D printed simulation study
Crestal strain of two-implant mandibular overdentures with implants placed at different positions: An in vitro 3D printed simulation study
Available online 18 November 2023Author links open overlay panel, , , , AbstractStatement of problemThe 2-implant mandibul...
Influence of intraoral scanner and finish line location on the fabrication trueness and margin quality of additively manufactured laminate veneers fabricated with a completely digital workflow
Influence of intraoral scanner and finish line location on the fabrication trueness and margin quality of additively manufactured laminate veneers fabricated with a completely digital workflow
Available online 17 November 2023Author links open overlay panel, , , , , , , AbstractStatement of problemKnowledge of the...
Articulation distortion in Mandarin-speaking individuals with complete arch maxillary implant-supported fixed dental prostheses
Articulation distortion in Mandarin-speaking individuals with complete arch maxillary implant-supported fixed dental prostheses
Available online 17 November 2023Author links open overlay panel, , , , ABSTRACTPurposeThe purpose of this clinical study ...
Which metal surface treatment improves the bond strength between metal alloys and acrylic resin in removable partial dentures? A systematic review
Which metal surface treatment improves the bond strength between metal alloys and acrylic resin in removable partial dentures? A systematic review
Available online 17 November 2023Author links open overlay panel, , , , ABSTRACTPurposeThe purpose of this systematic revi...
Effect of storage temperature on the dimensional stability of DLP printed casts
Effect of storage temperature on the dimensional stability of DLP printed casts
Statement of problemDespite studies focusing on the accuracy and dimensional stability of additive manufacturing, research...
阅读更多
format_indent_increase