SCI Abstract

search
+
Comprehensive Evaluation of Long-Term Dentin Bond Strength, Water Sorption, Solubility, and Degree of Conversion of Self-Adhesive Resin Composites
Comprehensive Evaluation of Long-Term Dentin Bond Strength, Water Sorption, Solubility, and Degree of Conversion of Self-Adhesive Resin Composites
Purpose: To evaluate the long-term microtensile bond strength (µTBS) to dentin, water sorption (WSP) and solubility (WSL),...
Direct Composite Restorations on Permanent Teeth in the Anterior and Posterior Region – An Evidence-Based Clinical Practice Guideline – Part 1: Indications for Composite Restorati
Direct Composite Restorations on Permanent Teeth in the Anterior and Posterior Region – An Evidence-Based Clinical Practice Guideline – Part 1: Indications for Composite Restorati
Purpose: This German S3 clinical practice guideline offers evidence-based recommendations for the use of composite materia...
Four-year Outcomes of Class III and IV Anterior Restorations Based on a Subset of German Health Insurance Data
Four-year Outcomes of Class III and IV Anterior Restorations Based on a Subset of German Health Insurance Data
Purpose: Numerous studies report on the outcome performance of posterior composite restorations. However, there are fewer ...
Evaluation of Monomer-containing Isocyanate Groups on Stabilizing Demineralized Dentin Matrix Against Bond Interface Degradation
Quintessenz Verlags-GmbH
The Influence of Erbium Laser Pretreatment on Dentin Shear Bond Strength and Bond Failure Modes: A Systematic Review and Network Meta-Analysis
Quintessenz Verlags-GmbH
Bonding of Composite Cements Containing 10-MDP to Zirconia Ceramics Without Dedicated Ceramic Primer
Quintessenz Verlags-GmbH
Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and Long-term Aging on the Bond Strength to Composite Cement
Quintessenz Verlags-GmbH
Deep Margin Elevation – A Retrospective Clinical Study
Quintessenz Verlags-GmbH
Evaluation of Microbiological Susceptibility and Long-term Adhesive Properties to Dentin of Primers with Terminalia catappa Linn
Quintessenz Verlags-GmbH
Clinical Performance of Posterior Indirect Resin Composite Restorations with the Proximal Box Elevation Technique: A Prospective Clinical Trial up to 3 Years
Quintessenz Verlags-GmbH
75 Years Ago: Discovery of Resin Adhesion to Acid-etched Enamel – A Comparison of the 1949 and 1955 Methods
75 Years Ago: Discovery of Resin Adhesion to Acid-etched Enamel – A Comparison of the 1949 and 1955 Methods
Purpose: This paper describes previously unknown details about the discovery of resin adhesion to acid-etched human enamel...
Effects of Surface Textures Created Using Additive Manufacturing on Shear Bond Strength Between Resin and Zirconia
Effects of Surface Textures Created Using Additive Manufacturing on Shear Bond Strength Between Resin and Zirconia
Purpose: This investigation aimed to assess the impact of additive manufacturing-generated surface textures on zirconia bo...
Bond Strength, Microleakage, Microgaps, and Marginal Adaptation of Self-adhesive Resin Composites to Tooth Substrates with and without Preconditioning with Universal Adhesives
Bond Strength, Microleakage, Microgaps, and Marginal Adaptation of Self-adhesive Resin Composites to Tooth Substrates with and without Preconditioning with Universal Adhesives
Purpose: This study investigated and compared the bond strengths, microleakage, microgaps, and marginal adaptation of self...
Multi-Parameter Characterization of HEMA/BPA-free 1- and 2-step Universal Adhesives Bonded to Dentin
Multi-Parameter Characterization of HEMA/BPA-free 1- and 2-step Universal Adhesives Bonded to Dentin
Purpose: This study aimed to investigate the bonding effectiveness of two HEMA/BPA-free universal adhesives (UAs) to flat ...
Comparison of Adhesion Performance of a Self-curing and a Light-curing Universal Adhesive to Various Dental Substrates and CAD/CAM Materials
Comparison of Adhesion Performance of a Self-curing and a Light-curing Universal Adhesive to Various Dental Substrates and CAD/CAM Materials
Purpose: To compare the adhesion of a self-curing (Tokuyama Universal Bond, TUB) and a light-curing (Scotchbond Universal,...
Bond Strength to Lithium-Disilicate Ceramic after Different Surface Cleaning Approaches
Bond Strength to Lithium-Disilicate Ceramic after Different Surface Cleaning Approaches
Purpose: To evaluate the effect of different lithium-disilicate (LiSi) glass-ceramic surface decontamination procedures on...
High C-Factor Cavities: How Do “Snowplow Technique”, Adhesive Application Mode and Aging Influence the Microtensile Bond Strength to Dentin?
High C-Factor Cavities: How Do “Snowplow Technique”, Adhesive Application Mode and Aging Influence the Microtensile Bond Strength to Dentin?
Purpose: To investigate the microtensile bond strength (µTBS) to dentin in class-I cavities using different layering...
The Effect of Bonding Strategy and Aging on Adhesion to Primary Enamel: An In-Vitro Study
The Effect of Bonding Strategy and Aging on Adhesion to Primary Enamel: An In-Vitro Study
Purpose: Resin composites are commonly used in pediatric dentistry, but there is limited evidence on adhesion to primary t...
Randomized Clinical Split-Mouth Study on Partial Ceramic Crowns Luted with a Self-adhesive Resin Cement with or without Selective Enamel Etching: Long-Term Results after 15 Years
Randomized Clinical Split-Mouth Study on Partial Ceramic Crowns Luted with a Self-adhesive Resin Cement with or without Selective Enamel Etching: Long-Term Results after 15 Years
Purpose: This follow-up of a randomized clinical split-mouth study aimed to investigate the influence of selective enamel ...
Impact of Shelf-Life Simulation on a Self-Adhesive Composite: Polymerization Kinetics, Chemical and Color Stability
Impact of Shelf-Life Simulation on a Self-Adhesive Composite: Polymerization Kinetics, Chemical and Color Stability
Purpose: To determine the polymerization kinetics and color stability of a self-adhesive and conventional resin composite ...
Preheated Composite as an Alternative for Bonding Feldspathic and Hybrid Ceramics: A Microshear Bond Strength Study
Preheated Composite as an Alternative for Bonding Feldspathic and Hybrid Ceramics: A Microshear Bond Strength Study
Purpose: To evaluate the bond strength between alternative or conventional luting agents and indirect restorative material...
Fourteen-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Non-carious Cervical Lesions
Fourteen-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Non-carious Cervical Lesions
Purpose: This randomized controlled trial aimed to evaluate the 14-year clinical performance of a HEMA-free 1-step self-et...
Three-year Clinical Performance of a Universal Adhesive in Non-Carious Cervical Lesions
Three-year Clinical Performance of a Universal Adhesive in Non-Carious Cervical Lesions
Purpose: The aim of this randomized controlled clinical trial was to evaluate the 3-year clinical performance of a univers...
Effects of Surface Treatment and Thermocycling on the Shear Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramic
Effects of Surface Treatment and Thermocycling on the Shear Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramic
Purpose: To investigate the effects of different surface treatments and thermocycling on shear bond strength (SBS) be-twee...
Effect of Carbodiimide (EDC) on the Bond Strength Longevity of Epoxy Resin-based Endodontic Sealer to Root Dentin: An In-Vitro Study
Effect of Carbodiimide (EDC) on the Bond Strength Longevity of Epoxy Resin-based Endodontic Sealer to Root Dentin: An In-Vitro Study
Purpose: EDC (1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride) can increase dentin bonding longevity. This stu...
Short-fiber Reinforced MOD Restorations of Molars with Severely Undermined Cusps
Short-fiber Reinforced MOD Restorations of Molars with Severely Undermined Cusps
Purpose: To assess the mechanical performance and enamel-crack propensity of large MOD composite-resin restorations on max...
Marginal Quality and Wear of Bulk-fill Materials for Class-II Restorations in Primary Molars
Marginal Quality and Wear of Bulk-fill Materials for Class-II Restorations in Primary Molars
Purpose: The aim of this in-vitro study was to evaluate the marginal integrity and wear of eight bulk-fill materials in co...
A Three-step Etch-and-Rinse vs a Universal Adhesive in Nanohybrid Composite Anterior Restorations: A Retrospective Clinical Evaluation
A Three-step Etch-and-Rinse vs a Universal Adhesive in Nanohybrid Composite Anterior Restorations: A Retrospective Clinical Evaluation
Purpose: To retrospectively evaluate the clinical behavior of direct anterior composite restorations performed with a univ...
Resin Cement/Enamel Interface: A Morphological Evaluation of the Acid-Base Resistant Zone, Enamel Etching Pattern, and Effect of Thermocycling on the Microshear Bond Strength
Resin Cement/Enamel Interface: A Morphological Evaluation of the Acid-Base Resistant Zone, Enamel Etching Pattern, and Effect of Thermocycling on the Microshear Bond Strength
Purpose: To evaluate the effects of etching mode (self-etch and etch-and-rinse) on acid-base resistant zone (ABRZ) formati...
The Effect of Nano-Silica Surface Infiltration on Bond Strength of a Phosphate-Monomer–containing Composite Cement to Zirconia
The Effect of Nano-Silica Surface Infiltration on Bond Strength of a Phosphate-Monomer–containing Composite Cement to Zirconia
Purpose: To evaluate the bonding receptiveness of zirconia treated with nano-silica surface infiltration and the bond stre...
Load More
format_indent_increase