M. R. Viotti and A. Albertazzi, “Robust speckle metrology techniques for stress analysis and NDT,” J. Soc. Photo-Opt. Instrum. Eng. PM251 (2014). https://doi.org/10.1117/3.1002651
P. S. Lyubutin, S. V. Panin, V. V. Titkov, A. V. Eremin, and R. Sunder, “Development of the digital image correlation method to study deformation and fracture processes of structural materials,” Vestn. Permskogo Nat. Issled. Politekhn. Univ. Mekhanika, No. 1, 88–109 (2019).
M. A. Sutton, N. Li, D. Garcia, N. Cornille, J. J. Orteu, S. R. McNeill, H. W. Schreier, X. Li, and A. P. Reynolds, “Scanning electron microscopy for quantitative small and large deformation measurements: Part II: Experimental validation for magnifications from 200 to 10 000,” Exp. Mech. 47 (6), 789–804 (2007). https://doi.org/10.1007/s11340-007-9041-0
B. Pan, “Digital image correlation for surface deformation measurement: Historical developments, recent advances and future goals,” Meas. Sci. Technol. 29 (8) (2018). https://doi.org/10.1088/1361-6501/aac55b
J. J. Orteu, Y. Rotrou, T. Sentenac, and L. Robert, “An innovative method for 3-D shape, strain and temperature full-field measurement using a single type of camera: Principle and preliminary results,” Exp. Mech. 48 (2), 163–179 (2008). https://doi.org/10.1007/s11340-007-9071-7
L. Louis, T. F. Wong, and P. Baud, “Imaging strain localization by X-ray radiography and digital image correlation: Deformation bands in Rothbach sandstone,” J. Struct. Geol. 29 (1), 129–140 (2007). https://doi.org/10.1016/j.jsg.2006.07.015
G. Vendroux, N. Schmidt, and W. G. Knauss, “Submicron deformation field measurements: Part 3. Demonstration of deformation determinations,” Exp. Mech. 38 (3), 154–160 (1998). https://doi.org/10.1007/bf02325737
Y. Sun and J. H. L. Pang, “AFM image reconstruction for deformation measurements by digital image correlation,” Nanotecnology 933 (2006). https://doi.org/10.1088/0957-4484/17/4/016
J. C. A. de Deus Filho, L. C. da Silva Nunes, and J. M. C. Xavier, “ICorrVision-2D: An integrated Python-based open-source digital image correlation software for in-plane measurements (Part 1),” SoftwareX 19, 101131 (2022). https://doi.org/10.1016/j.softx.2022.101131
B. Pan, K. Qian, H. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review,” Meas. Sci. Technol. 20 (6) (2009). https://doi.org/10.1088/0957-0233/20/6/062001
S. V. Panin, V. V. Titkov, and P. S. Lyubutin, “Effect of the mesh size of the vector displacement field on the strain estimate in the digital image correlation method,” J. Appl. Mech. Tech. Phys. 58 (3), 425–434 (2017).
R. Yang, Y. Li, D. Zeng, and P. Guo, “Deep DIC: Deep learning-based Digital Image Correlation for end-to-end displacement and strain measurement,” J. Mater. Process. Technol. 302, 117474 (2022). https://doi.org/10.1016/j.jmatprotec.2021.117474
P. D. W. Bing and Y. Xia, “Incremental calculation for large deformation measurement using reliability-guided digital image correlation,” Opt. Lasers Eng. 50 (4), 586–592 (2012). https://doi.org/10.1016/j.optlaseng.2011.05.005
R. Bigger, B. Blaysat, C. Boo, M. Grewer, J. Hu, A. Jones, M. Klein, P. Lava, M. Pankow, K. Raghavan, P. Reu, T. Schmidt, T. Siebert, M. Simonsen, A. Trim, D. Turner, A. Vieira, and T. Weikert, “A good practices guide for digital image correlation,” Int. Digit. Image Correl. Soc., 1–94 (2018). https://doi.org/10.32720/IDICS/GPG.ED1
P. L. Reu, E. Toussaint, E. Jones, H. A. Bruck, M. Iadicola, R. Balcaen, D. Z. Turner, T. Siebert, P. Lava, and M. Simonsen, “DIC challenge: Developing images and guidelines for evaluating accuracy and resolution of 2D analyses,” Exp. Mech. 58 (7) (2018). https://doi.org/10.1007/s11340-017-0349-0
Y. L. Dong and B. Pan, “A review of speckle pattern fabrication and assessment for digital image correlation,” Exp. Mech. 57 (8), 1161–1181 (2017). https://doi.org/10.1007/s11340-017-0283-1
J. Brillaud and F. Lagattu, “Limits and possibilities of laser speckle and white-light image-correlation methods: Theory and experiments,” Appl. Opt. 41 (31), 6603–6613 (2002). https://doi.org/10.1364/AO.41.006603
Comments (0)