M.A. Abid, D.A. Abid, W.J. Aziz, T.M. Rashid, Iron oxide nanoparticles synthesized using garlic and onion peel extracts rapidly degrade methylene blue dye. Physica B: Condensed Matter, 622, 413277 (2021); https://doi.org/10.1016/j.physb.2021.413277.

B. Adejuyigbe, J. Kallini, D. Chiou, J.R. Kallini, Osteoporosis: molecular pathology, diagnostics, and therapeutics. International Journal of Molecular Sciences, 24(19), 14583 (2023); https://doi.org/10.3390/ijms241914583.

R. Adelfar, H. Mirzadeh, A. Ataie, M. Malekan, Crystallization kinetics of mechanically alloyed amorphous Fe-Ti alloys during annealing. Advanced Powder Technology 31(8), 3215 (2020); https://doi.org/10.1016/j.apt.2020.06.006.

F. Ahangaran, A. Hassanzadeh, S. Nouri, Surface modification of Fe3O4@SiO2 microsphere by silane coupling agent. International Nano Letters 3, 1 (2013); https://doi.org/10.1186/2228-5326-3-23.

M. Ahmad, J. Chen, K. Yang, T. Shah, Q. Zhang, B. Zhang, Preparation of amidoxime modified porous organic polymer flowers for selective uranium recovery from seawater. Chemical Engineering Journal, 418, 129370 (2021); https://doi.org/10.1016/j.cej.2021.129370.

Z.A. Alothman, A review: fundamental aspects of silicate mesoporous materials. Materials, 5(12), 2874 (2012); https://doi.org/10.3390/ma5122874.

S. An, Q. Gong, Y. Huang, Promotive Effect of Zinc Ions on the Vitality, Migration, and Osteogenic Differentiation of Human Dental Pulp Cells. Biological Trace Element Research, 175(1), 112 (2017); https://doi.org/10.1007/s12011-016-0763-7.

Z.Y. An, Y.H. Zhang, X. Li, Y. Gu, Magnetic and thermal characterization of Fe-B-P amorphous nanoparticles prepared by chemical reduction. Journal of Magnetism and Magnetic Materials 560, 169648 (2022); https://doi.org/10.1016/j.jmmm.2022.169648.

B. Avar, S. Ozcan, Characterization and amorphous phase formation of mechanically alloyed Co66Fe5Ni5Ti25B5 powders. Journal of Alloys and Compounds 650, 53 (2015); https://doi.org/10.1016/j.jallcom.2015.07.268.

G. Bai, H. Dong, Z. Zhao, Y. Wang, Q. Chen, M. Qiu, Preparation of nanoscale Ni–B amorphous alloys and their application in the Selective Hydrogenation of Cinnamic Acid. Journal of Nanoscience and Nanotechnology 13(7), 5012 (2013); https://doi.org/10.1166/jnn.2013.7572.

R.T. Beck, K.D. Illingworth, K.J. Saleh, Review of periprosthetic osteolysis in total joint arthroplasty: an emphasis on host factors and future directions. Journal of Orthopaedic Research 30 (4), 541 (2012); https://doi.org/10.1002/jor.21554.

M. Beldjehem, S. Alleg, N. Bensebaa, J.J. Suñol, J.M. Greneche, Thermal Stability, Structure, Hyperfine, and Magnetic Properties of Nanostructured FeCo-2.5 wt.% Ni Powders. Journal of Superconductivity and Novel Magnetism 36(1), 301 (2023); https://doi.org/10.1007/s10948-022-06467-3.

M. Belyansky, M. trenary, Reflection adsorption infrared spectroscopy of the oxidation of thin films of boron and hafnium diboride grown on Hf (0001). Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 15(6), 3065 (1997); https://doi.org/10.1116/1.580848.

S. Bose, D. Ke, H. Sahasrabudhe, A. Bandyopadhyay, Additive manufacturing of biomaterials. Progress in Materials Science 93, 45 (2018); https://doi.org/10.1016/j.pmatsci.2017.08.003.

T.C. Brunold, N. Tamura, N. Kitajima, Y. Moro-oka, E.I. Solomon, Spectroscopic Study of [Fe2(O2) (OBz)2 2]: Nature of the μ-1,2 Peroxide− Fe (III) Bond and Its Possible Relevance to O2 Activation by Non-Heme Iron Enzymes. Journal of the American Chemical Society 120(23), 5674 (1998).

L.J. Burcham, J. Datka, I.E. WACHS, In situ vibrational spectroscopy studies of supported niobium oxide catalysts. The Journal of Physical Chemistry B, 103(29), 6015(1999).

Q. Cao, G. Huang, L. Ma, L. Xing, Comparison of a cold‐sprayed and plasma‐sprayed Fe25Cr20Mo1Si amorphous alloy coatings on 40Cr substrates. Materials and Corrosion 71(11), 1872 (2020); https://doi.org/10.1002/maco.202011558.

T. Cheung, S.K. Bhargava, M. Hobday, K. Foger, Adsorption of NO on Cu exchanged zeolites, an FTIR study: effects of Cu levels, NO pressure, and catalyst pretreatment. Journal of Catalysis 158(1), 301 (1996).

K. Choi, S. Omanovic, Solution combustion synthesis of nanostructured Ni/W-containing electrocatalysts for hydrogen evolution reaction: The effect of fuel-to-oxidant ratio. Nano-Structures & Nano-Objects 37, 101075 (2024); https://doi.org/10.1016/j.nanoso.2023.101075.

K. Chong, Y. Gao, Z. Zhang, Y. Zou, X. Liang, Thermal stability and corrosion behavior of a novel Zr22.5Ti22.5Hf22.5Ni22.5Ta10 high-entropy amorphous alloy. Corrosion Science 213, 110979 (2023); https://doi.org/10.1016/j.corsci.2023.110979.

C. Cui, C. Ren, Y. Liu, S. Wang, H. Su, Directional solidification of Fe-Al-Ta eutectic by electron beam floating zone melting. Journal of Alloys and Compounds 785, 62 (2019); https://doi.org/10.1016/j.jallcom.2019.01.158.

M.K. Datta, D.T. Chou, D. Hong, P. Saha, S.J. Chung, B. Lee, A. Sirinterlikci, M. Ramanathan, A. Roy, P.N. Kumta, Structure and thermal stability of biodegradable Mg–Zn–Ca based amorphous alloys synthesized by mechanical alloying. Materials Science and Engineering: B: 176(20), 1637 (2011); https://doi.org/10.1016/j.mseb.2011.08.008.

J.F. Deng, H. Li, W. Wang, Progress in design of new amorphous alloy catalysts. Catalysis today 51(1), 113 (1999).

B. Dong, S. Zhou, S. Pan, Y. Wang, J. Qin, Y. Xing, Relationship between relaxation embrittlement and atomic cluster structure in amorphous alloys. Journal of Non-Crystalline Solids 626, 122770 (2024); https://doi.org/10.1016/j.jnoncrysol.2023.122770.

M.H.K. Feizabad, G.R. Khayati, S. SharafI, M. Ranjbar, Improvement of soft magnetic properties of Fe0.7Nb0.1Zr0.1Ti0.1 amorphous alloy: A kinetic study approach. Journal of Non-Crystalline Solids 493, 11 (2018); https://doi.org/10.1016/j.jnoncrysol.2018.04.033.

M. Füredi, C.V. Manzano, A. Marton, B. Fodor, A. Alvarez-fernandez, S. Guldin, Beyond the meso/macroporous boundary: extending capillary condensation-based pore size characterization in thin films through tailored Adsorptives. The Journal of Physical Chemistry Letters 15(5), 1420 (2024); https://doi.org/0.1021/acs.jpclett.3c03442.

B.N. Galimzyanov, A.V. Mokshin, Mechanical response of mesoporous amorphous NiTi alloy to external deformations. International Journal of Solids and Structures 224, 111047 (2021); https://doi.org/10.1016/j.ijsolstr.2021.111047.

V.A. Georgeanu, O. Gingu, I.V. Antoniac, H.O. Manolea, Current options and future perspectives on bone graft and biomaterials substitutes for bone repair, from clinical needs to advanced biomaterials research. Applied Sciences 13(14), 8471 (2023); https://doi.org/10.3390/app13148471.

O. Güler, T. Varol, Ü. Alver, A. Çanakçi, The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating. Journal of Alloys and Compounds 782, 679 (2019); https://doi.org/10.1016/j.jallcom.2018.12.229.

X.X. Guo, T.T. Hu, B. Meng, Y. Sun, Y. F. Han, Catalytic degradation of anthraquinones-containing H2O2 production effluent over layered Co-Cu hydroxides: defects facilitating hydroxyl radical generation. Applied Catalysis B: Environmental 260, 118157 (2020); https://doi.org/10.1016/j.apcatb.2019.118157.

K.I. Hadjiivanov, D.A. Panayotov, M.Y. Mihaylov, E.Z. Ivanova, K.K. Chakarova, S. M. Andonova, N. L. Drenchev, Power of infrared and raman spectroscopies to characterize metal-organic frameworks and investigate their interaction with guest molecules. Chemical Reviews 121(3), 1286 (2020); https://doi.org/10.1021/acs.chemrev.0c00487.

K. Hadjiivanov, B. Tsyntsarski, T. Venkov, D. Klissurski, M. Daturi, J. Saussey, J.C. Lavalley, FTIR spectroscopic study of CO adsorption on Co–ZSM-5: Evidence of formation of Co+(CO)4 species. Physical Chemistry Chemical Physics 5(8), 1695 (2003); https://doi.org/10.1039/b300844d.

A. Houssou, S. Amirat, H. Ferkous, S. Alleg, K. Dadda, R. Boulechfar, A. Erto, N. Elboughdiri, K.K. Yadav, M.A. Alreshidi, J.K. Bhutto, W. Bouchelaghem, L. Abadlia, Y. Benguerba, Experimental and computational investigations on mechanically alloyed Fe55Co30Ni15 powders. Powder Technology, 119203 (2023); https://doi.org/10.1016/j.powtec.2023.119203.

L.J. Huang; H.J. Lin,; H. Wang, L.Z. Ouyang, M. Zhu, Amorphous alloys for hydrogen storage. Journal of Alloys and Compounds 941, 168945 (2023); https://doi.org/10.1016/j.jallcom.2023.168945.

S.J. Huang, A. Muneeb, A. Abbas, R. Sankar, The effect of Mg content and milling time on the solid solubility and microstructure of Ti–Mg alloys processed by mechanical milling. Journal of Materials Research and Technology 11, 1424 (2021); https://doi.org/https://doi.org/10.1016/j.jmrt.2021.01.097.

F.S. Irwansyah, A.I. Amal, E.W. Diyanthi, E.P. Hadisantoso, A. R. Noviyanti, D. R. Eddy, R. Risdiana, How to read and determine the specific surface area of inorganic materials using the Brunauer-Emmett-Teller (BET) method. ASEAN Journal of Science and Engineering 4(1), 61 (2024); https://doi.org/10.17509/ajse.v4i1.60748.

ISO 10993-5:2009 Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity. ISO Standards (2009).

ISO. Biological evaluation of medical devices. Tests for in vitro cytotoxicity.: International Organization for Standardization, BS EN ISO 10993-5 (2009).

A. Jabed, Z.U. Rahman, M.M. Khan, W. Haider, I. Shabib, Combinatorial development and in vitro characterization of the quaternary Zr–Ti–X–Y (X–Y= Cu–Ag/Co–Ni) metallic glass for prospective bioimplants. Advanced Engineering Materials 21(12), 1900726 (2019); https://doi.org/10.1002/adem.201900726.

B. Jeż, M. Nabiałek, K.J. Jeż, Preparation of Magnetic Composites Based on Bulk Amorphous Iron Alloys. Materiale Plastice 56(4), 1008 (2019); https://doi.org/10.37358/MP.19.4.5299.

K. Kaneko, H. Otsuka, New IUPAC recommendation and characterization of nanoporous materials with physical adsorption. Accounts of Materials & Surface Research 5(2), 25 (2020).

N. Khitouni, B. Hammami; N. Llorca-Isern, W. B. Mbarek, J. J. SUÑOL, M. Khitouni, Microstructure and Magnetic Properties of Nanocrystalline Fe60−xCo25Ni15Six Alloy Elaborated by High-Energy Mechanical Milling. Materials 15 (18), 6483 (2022); https://doi.org/10.3390/ma15186483.

G.L. Koons, M. Diba, A. G. Mikos, Materials design for bone-tissue engineering. Nature Reviews Materials 5(8), 584 (2020); https://doi.org/10.1038/s41578-020-0204-2.

P.S. KowalskI, C. Bhattacharya, S. Afewerki, R. Langer, Smart biomaterials: recent advances and future directions. ACS Biomaterials Science & Engineering 4(11), 3809 (2018); https://doi.org/10.1021/acsbiomaterials.8b00889.

J.D. Lamplot, B.L. Smith, H.S. Slone, O.L. Hauck, C. A. Wijdicks, Tape-reinforced graft suturing and retensioning of adjustable-loop cortical buttons improve quadriceps tendon autograft biomechanics in anterior cruciate ligament reconstruction: A cadaveric study. Arthroscopy: The Journal of Arthroscopic & Related Surgery 40(1), 136 (2024); https://doi.org/10.1016/j.arthro.2023.06.021.

J. D. Lee, Química inorgânica Não Tão Concisa. São Paulo: Editora Blücher, 544 (1999).

T. Lee, M. Yamasaki, Y. Kawamura, Y. Lee, C.S. Lee, High strain-rate superplasticity of AZ91 alloy achieved by rapidly solidified flaky powder metallurgy. Materials Letters 234, 245 (2019); https://doi.org/10.1016/j.matlet.2018.09.090.

R. Li, Q. Chen, L. Ji, X. Peng, G. Huang, Based on internal friction theory: Investigating of Fe-based bulk amorphous alloys on mechanical properties with different Si content. Journal of Non-Crystalline Solids 563, 120813 (2021).

K. Liu, S. Wang, Y. Feng, K. Zhang, Y. Zhang, Phase transformation mechanism and magnetic properties of Sm-Fe alloys produced by melt-spinning and high-energy ball milling. Journal of Magnetism and Magnetic Materials 513, 167229 (2020); https://doi.org/10.1016/j.jmmm.2020.167229.

L. Liu, Y. Ahmadi, K.H. Kim, D. Kukkar, J.E. Szulejko, The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon. Science of The Total Environment 906, 167308 (2024); https://doi.org/10.1016/j.scitotenv.2023.167308.

N. Liu, Y. Gao, C. Chen, P. Zhou, X. Wang, J. Zhang, J. CAO, Oxidation behavior of Al15Fe20Co20Ni20Cr25-xNbx high-entropy alloys at elevated temperatures. Vacuum 213, 112092 (2023); https://doi.org/10.1016/j.vacuum.2023.112092.

S. Liu, I. Shohji, T. Kobayashi, J. Hirohashi, T. Wake, H. Yamamoto, Y. Kamakoshi, Mechanistic study of Ni–Cr–P alloy electrodeposition and characterization of deposits. Journal of Electroanalytical Chemistry 897, 115582 (2021); https://doi.org/10.1016/j.jelechem.2021.115582.

X. Liu, X. Wang, Y. Si, F. Han, Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5 (X= Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions. Nanomaterials 11(2), 488 (2021); https://doi.org/10.3390/nano11020488.

J.A. Lopez, F. González, F.A. Bonilla, G. Zambrano, M.E. Gómez, Synthesis and characterization of Fe3O4 magnetic nanofluid. Revista Latinoamericana de Metalurgia y Materiales 30(1), 60 (2010).

J. Málek, Structural relaxation rate and aging in amorphous solids. The Journal of Physical Chemistry C:127(12), 6080 (2023); https://doi.org/10.1021/acs.jpcc.3c00637.

J. Manoj, R. E. Vizhi, Effect of Al substitution on their structural and magnetic properties of Ba0.5Sr0.5Fe12O19 prepared via sol–gel auto-combustion method. Journal of Materials Science: Materials in Electronics 35(6), 370 (2024); https://doi.org/10.1007/s10854-024-12037-1.

M. Monavarian, S. Kader, S. Moeinzadeh, E. Jabbari, Regenerative scar-free skin wound healing. Tissue Engineering Part B: Reviews 25(4), 294 (2019); https://doi.org/10.1089/ten.TEB.2018.0350.

M. Moneta, M. Wasiak, P. Sovak, Temperature dependence of structural and magnetic transformations in Finemet-type amorphous alloys with Fe substituted for La. Journal of Thermal Analysis and Calorimetry148(4), 1577 (2023); https://doi.org/10.1007/s10973-022-11675-z.

A. Monfared, A. Ghaee, S. Ebrahimi-Barough, Preparation and characterization of crystallized and relaxed amorphous Mg-Zn-Ca alloy ribbons for nerve regeneration application. Journal of Non-Crystalline Solids 489, 71 (2018); https://doi.org/10.1016/j.jnoncrysol.2018.03.031.

S.M. Moosavinejad, M. Madhoushi, M. VakilI, D. Rasouli, Evaluation of degradation in chemical compounds of wood in historical buildings using FT-IR and FT-Raman vibrational spectroscopy. Maderas. Ciencia y Tecnología 21(3), 381 (2019); http://dx.doi.org/10.4067/S0718-221X2019005000310.

Z. Msetra, N. Khitouni, A. Alsawi, M. Khitouni, V. Optasanu, J.J. Suñol, M. Chemingui, Structural, microstructural, and magnetic properties of nanocrystalline-amorphous Fe–Co–Ta–B alloy processed by high-energy mechanical alloying. Journal of Materials Research and Technology 26, 8934 (2023); https://doi.org/10.1016/j.jmrt.2023.09.183.

A. Mukhtar, N. Mellon, S. Saqib, L. S. Pee, M.A. Bustam, Extension of BET theory to CO2 adsorption isotherms for ultra-microporosity of covalent organic polymers. SN Applied Sciences 2(7), 1 (2020); https://doi.org/10.1007/s42452-020-2968-9.

N.J. Murphy, D. Graan, G.D. Briggs, Z.J. Balogh, Acute minimally invasive bone grafting of long bone fractures to reduce the incidence of fracture non-union. Medical Hypotheses 178, 111131 (2023); https://doi.org/10.1016/j.mehy.2023.111131.

P. Murugaiyan, A. Mitra, R.K. Roy, A.K. Panda, Nanocrystallization and Core-loss properties of Fe-rich FeSiBPNbCu nanocrystalline alloy. Journal of Magnetism and Magnetic Materials 552, 169228 (2022); https://doi.org/10.1016/j.jmmm.2022.169228.

N. Nwahara, G. Abrahams, J. Mack, E. Prinsloo, T. Nyokong, A hypoxia responsive silicon phthalocyanine containing naphthoquinone axial ligands for photodynamic therapy activity. Journal of Inorganic Biochemistry 239, 112078 (2023); https://doi.org/10.1016/j.jinorgbio.2022.112078.

Y. Nykyruy, S. Mudry, Y. Kulyk, A. Borisyuk, Magnetic properties and nanocrystallization process in Co–(Me)–Si–B amorphous ribbons. Applied Nanoscience, 1 (2022); https://doi.org/10.1007/s13204-022-02746-6.

L. Petit, T. Cardinal, J. J. Videau, E. Durand, L. Canioni, M. Martines, Y. Guyot, G. Boulon, Effect of niobium oxide introduction on erbium luminescence in borophosphate glasses. Optical Materials 28(3), 172 (2006); https://doi.org/10.1016/j.optmat.2004.12.007.

Y. Prabhu, A. Jain, S. Vincent, W.H. Ryu, E.S. Park, R. Kumar, A.D. Bagde, J. Bhatt, Compositional design and in vitro investigation on novel Zr–Co–Cu–Ti metallic glass for biomedical applications. Intermetallics. 150, 107692 (2022); https://doi.org/10.1016/j.intermet.2022.107692.

N.V. Priezjev, The effect of thermal history on the atomic structure and mechanical properties of amorphous alloys. Computational Materials Science174, 109477 (2020); https://doi.org/10.1016/j.commatsci.2019.109477.

N. Primeau, C. Vautey, M. Langlet, The effect of thermal annealing on aerosol-gel deposited SiO2 films: a FTIR deconvolution study. Thin Solid Films 310(1-2), 47 (1997); https://doi.org/10.1016/S0040-6090(97)00340-4.

N.E. Putra, M.J. Mirzaali, I. Apachitei, J. Zhou, A.A. Zadpoor, Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution. Acta biomaterialia 109, 1 (2020); https://doi.org/10.1016/j.actbio.2020.03.037.

S. Rajan, Thanka; A. Bendavid, B. Subramanian, Cytocompatibility assessment of Ti-Nb-Zr-Si thin film metallic glasses with enhanced osteoblast differentiation for biomedical applications. Colloids and Surfaces B: Biointerfaces 173, 109 (2019); https://doi.org/10.1016/j.colsurfb.2018.09.041.

A. Rasouli, H. Naffakh-Moosavy, Dissimilar laser welding of NiTi shape memory alloy to NiCr alloy. Journal of Materials Research and Technology 26, 3947 (2023); https://doi.org/10.1016/j.jmrt.2023.08.175.

A. Rathi, V.M. Meka, T.V. Jayaraman, Synthesis of nanocrystalline equiatomic nickel-cobalt-iron alloy powders by mechanical alloying and their structural and magnetic characterization. Journal of Magnetism and Magnetic Materials 469, 467 (2019); https://doi.org/10.1016/j.jmmm.2018.09.002.

V. Rathod, A.V. Anupama, R.V. Kumar, V.M. Jali, B. Sahoo, Correlated vibrations of the tetrahedral and octahedral complexes and splitting of the absorption bands in FTIR spectra of Li-Zn ferrites. Vibrational Spectroscopy 92, 267 (2017); https://doi.org/10.1016/j.vibspec.2017.08.008.

M. Roesner, S. Zankovic, A. Kovacs, M. Benner, R. Barkhoff, M. Seidenstuecker, Mechanical Properties and Corrosion Rate of ZnAg3 as a Novel Bioabsorbable Material for Osteosynthesis. Journal of Functional Biomaterials 15 (2), 28 (2024); https://doi.org/10.3390/jfb15020028.

I. Roohani, G. C. Yeo, S. M. Mithieux, A. S. Weiss, Emerging concepts in bone repair and the premise of soft materials. Current Opinion in Biotechnology 74, 220 (2022); https://doi.org/10.1016/j.copbio.2021.12.004.

P. Sahu, S. Samal, V. Kumar, Influence of Si and Mn on the Phase Formation, Crystallization Kinetics, and Enhanced Magnetic Properties of Mechanically Alloyed NiCoFe (SiMn)x High Entropy Amorphous Alloys. Silicon, 1 (2023); https://doi.org/10.1007/s12633-023-02324-7.

P. Salwa, T. Goryczka, Crystallization of mechanically alloyed Ni50Ti50 and Ti50Ni25Cu25 shape memory alloys. Journal of Materials Engineering and Performance 29(5), 2848 (2020); https://doi.org/10.1007/s11665-020-04820-y.

D. S. Sanditov, M.I. Ojovan, M.V. Darmaev, Glass transition criterion and plastic deformation of glass. Physica B: Condensed Matter 582, 411914 (2020); https://doi.org/10.1016/j.physb.2019.411914.

J. Serafin, B. Dziejarski, Activated carbons—Preparation, characterization and their application in CO2 capture: A review. Environmental Science and Pollution Research 31(28), 40008 (2024); https://doi.org/10.1007/s11356-023-28023-9.

L. Shan, X. Wang, Y. Wang, Extension of solid solubility and structural evolution in nano-structured Cu-Cr solid solution induced by high-energy milling. Materials 13(23), 5532 (2020); https://doi.org/10.3390/ma13235532.

J.F. Shen, C.M. Wu, J.J. Yu, Y.R. Li, Investigation on molecular cluster behavior and initiation of capillary condensation within nanoarrays. International Journal of Heat and Mass Transfer 210, 124173 (2023); https://doi.org/10.1016/j.ijheatmasstransfer.2023.124173.

X.Z. Shi, Y. Gu, T.Y. Liu, Z. H. Jiang, R. Li, F. Zeng, Effect of different P2O5/SnF2 ratios on the structure and properties of phosphate glass. Journal of Non-Crystalline Solids 578, 121350 (2022).

A. Špaldoňová, M. Havelcová, L. Lapčák, V. Machovič, D. Titěra, Analysis of beeswax adulteration with paraffin using GC/MS, FTIR-ATR and Raman spectroscopy. Journal of Apicultural Research 60(1), 73 (2021).

C. Sun, X. Hai, S. Xi, Z. Fan, P. Li, W. Wang, New insights of solid-state alloying and amorphous-nanocrystalline cyclic phase transitions during Cr-40 wt.% Mo powder milling. Journal of Alloys and Compounds 731, 667 (2018); https://doi.org/10.1016/j.jallcom.2017.10.083.

S. Tantavisut, B. Lohwongwatana, A. Khamkongkaeo, A. Tanavalee, P. Tangpornprasert, P. Ittiravivong, In vitro biocompatibility of novel titanium-based amorphous alloy thin film in human osteoblast-like cells. Chulalongkorn Medical Journal 63(2), 89 (2019); https://doi.org/10.58837/CHULA.CMJ.63.2.4.

X. Tao, Z. Zhang, B. Zhang, S. Zhu, Y. Fan, H.Tian, Plasma sprayed CoNiCrMoNb (BSi) high-entropy amorphous alloy coating: The effect of spraying power on microstructure, mechanical and tribological properties. Materials Chemistry and Physics 314, 128887 (2024); https://doi.org/10.1016/j.matchemphys.2024.128887.

S. Thanka Rajan, A. Bendavid, B. Subramanian, Cytocompatibility assessment of Ti-Nb-Zr-Si thin film metallic glasses with enhanced osteoblast differentiation for biomedical applications. Colloids and Surfaces B: Biointerfaces 173, 109 (2019); https://doi.org/10.1016/j.colsurfb.2018.09.041.

Q. Tian, K. Deng, Z. Xu, K. Han, H. Zheng, Microstructural Characterization and Mechanical Property of Al-Li Plate Produced by Centrifugal Casting Method. Metals 11(6), 966 (2021); https://doi.org/10.3390/met11060966.

Y. Tian, Q. Chen, C. Yan, H. Deng, Y. He, Classification of adsorption isotherm curves for shale based on pore structure. Petrophysics 61(05), 417 (2020).

C.F. Toncón-Leal, J. Villarroel-Rocha, M.T.P.D. Silva, T.P. Braga, K. Sapag, Characterization of mesoporous region by the scanning of the hysteresis loop in adsorption–desorption isotherms. Adsorption 27(7), 1109 (2021); https://doi.org/10.1007/s10450-021-00342-8.

M.M. Vasić, T. Žák, N. Pizúrová, I.S. Simatović, D.M. Minić, Influence of Thermal Treatment on Microstructure and Corrosion Behavior of Amorphous Fe40Ni40B12Si8 Alloy. Metallurgical and Materials Transactions A: 52, 34 (2021).

C. Velmurugan, V. Senthilkumar, The effect of Cu addition on the morphological, structural and mechanical characteristics of nanocrystalline NiTi shape memory alloys. Journal of Alloys and Compounds 767, 944 (2018); https://doi.org/10.1016/j.jallcom.2018.07.217.

J.L. Wang, Y. Wan, Z.J. Ma, Y.C. Guo, Z. Yang, P. Wang, J.P. Li, Glass-forming ability and corrosion performance of Mn-doped Mg–Zn–Ca amorphous alloys for biomedical applications. Rare Metals 37(7), 579 (2018); https://doi.org/10.1007/s12598-018-1032-z.

N. Wang, Q. Cao, X. Wang, S. Ding, D. Zhang, J.Z. Jiang, Ultra-strong and ductile amorphous-crystalline Ti-Zr-Hf-Nb-Ta/Co-Ni-V nanolaminate thin films. Journal of Alloys and Compounds 973, 172874 (2024); https://doi.org/10.1016/j.jallcom.2023.172874.

S. Wang, T. Xu, Y. Wu, X. Chen, X. Yang, Brazing Temperature Effects on the Microstructure and Mechanical Properties of Ti-45Al-8Nb Joints Using TiZrCuNi Amorphous Interlayer. Coatings 14(3), 300 (2024); https://doi.org/10.3390/coatings14030300.

Z.H. Wang, T. Urisu, H. Watanabe, K. Ooi, G.R. Rao, S. Nanbu, M. Maki, M. Aoyagi, Assignment of surface IR absorption spectra observed in the oxidation reactions: 2H+H2O/Si (1 0 0) and H2O+H/Si (1 0 0). Surface science 575(3), 330 (2005).

J. Wu, X. Cheng, J. Wu, J. Chen, X. Pei, The development of magnesium‐based biomaterials in bone tissue engineering: A review. Journal of Biomedical Materials Research Part B: Applied Biomaterials 112(1), e35326, (2024); https://doi.org/10.1002/jbm.b.35326.

H. Yaykasli, B. Avar, M. Panigrahi, M. Gogebakan, H. Eskalen, Investigation of the Microstructural, Morphological, and Magnetic Properties of Mechanically Alloyed Co60Fe18Ti18Si4 Powders. Arabian Journal for Science and Engineering 48(1), 845 (2023); https://doi.org/10.1007/s13369-022-07037-4.

H. Yuan, L. Zhou, G.T. Wang, L.B. Zheng, Y.Z. Yang, Si microalloying optimizes the thermal stability, crystallization behaviors and magnetic properties of Fe-rich Fe-B-Cu-Hf alloys. Journal of Magnetism and Magnetic Materials 500, 166339 (2020); https://doi.org/10.1016/j.jmmm.2019.166339.

Y. Zhang, Y. Liu, R. Zheng, Y. Zheng, L. Chen, Research progress on corrosion behaviors and biocompatibility of rare-earth magnesium alloys in vivo and in vitro. Journal of Rare Earths 4(12), 1827 (2023); https://doi.org/10.1016/j.jre.2023.03.005.

Q. Zhao, C. Gao, L. Hou, H. Yang, Emerging Phosphate-Functionalized Co3O4/Kaolinite Composites for Enhanced Activation of Peroxymonosulfate. Inorganic Chemistry 62(12), 4823 (2023); https://doi.org/10.1021/acs.inorgchem.2c04059.