Purpose

The aim of this study is to reduce the uncertainty associated with determining dose-to-water using an amorphous silicon electronic portal imaging detector (EPID) under reference conditions by identifying and accounting for operational and environmental factors influencing long-term stability of EPID response.

Methods

Measurements of the EPID relative response, corrected for variations in linear accelerator (linac) output, were performed regularly over a period of 12 months. For every acquired image set, measurements of detector supply voltages, internal operating temperature, and ambient environmental conditions were obtained. Pearson r correlation coefficients were then calculated for each pair of variables, a subset of which were fitted using multiple linear regression to develop a predictive model of EPID response. Principal component analysis was performed on the dataset to reveal the internal structure of the data in a way that best accounts for the observed variations.

Results

The +5.5 V power supply voltage, internal operating temperature, and the accumulated dose absorbed in EPID were identified as having the greatest influence on the long-term stability of EPID response. By correcting for the combined effect of these variables, the mean difference in linac output as measured by the EPID relative to a reference-class chamber improved from -0.46 % to 0.23 % over the period of the study.

Conclusions

This work suggests that the stability of an EPID over a period of a year can be improved by a factor of two by monitoring and accounting for the effects of variations in power supply voltage, internal temperature of the detector, and accumulated absorbed dose.

This article is protected by copyright. All rights reserved