Serrano C, van den Brink H, Pineau J, Prognon P, Martelli N (2019) Benefits of 3D printing applications in jaw reconstruction: a systematic review and meta-analysis. J Craniomaxillofac Surg 47:1387–1397. https://doi.org/10.1016/j.jcms.2019.06.008

Article  PubMed  Google Scholar 

Derksen W, Wismeijer D, Flugge T, Hassan B, Tahmaseb A (2019) The accuracy of computer-guided implant surgery with tooth-supported, digitally designed drill guides based on CBCT and intraoral scanning A prospective cohort study. Clin Oral Implants Res 30(10):1005–1015. https://doi.org/10.1111/clr.13514

Article  PubMed  Google Scholar 

Li L et al (2021) Research on the dimensional accuracy of customized bone augmentation combined with 3D-printing individualized titanium mesh: a retrospective case series study. Clin Implant Dent Relat Res 23:5–18. https://doi.org/10.1111/cid.12966

Article  CAS  PubMed  Google Scholar 

Nyberg EL et al (2017) 3D-printing technologies for craniofacial rehabilitation, reconstruction, and regeneration. Ann Biomed Eng 45:45–57. https://doi.org/10.1007/s10439-016-1668-5

Article  PubMed  Google Scholar 

Ettinger KS, Alexander AE, Morris JM, Arce K (2020) Novel geometry of an extended length chimeric scapular free flap for hemimandibular reconstruction: nuances of the technique streamlined by in-house virtual surgical planning and 3D printing for a severely vessel-depleted neck. J Oral Maxillofac Surg 78:823–834. https://doi.org/10.1016/j.joms.2020.01.012

Article  PubMed  Google Scholar 

Shah P, Chong BS (2018) 3D imaging, 3D printing and 3D virtual planning in endodontics. Clin Oral Investig 22:641–654. https://doi.org/10.1007/s00784-018-2338-9

Article  PubMed  Google Scholar 

Oberoi G et al (2018) 3D printing-encompassing the facets of dentistry. Front Bioeng Biotechnol 6:172. https://doi.org/10.3389/fbioe.2018.00172

Article  PubMed  PubMed Central  Google Scholar 

McAllister P, Watson M, Burke E (2018) A Cost-effective, in-house, positioning and cutting guide system for orthognathic surgery. J Maxillofac Oral Surg 17:112–114. https://doi.org/10.1007/s12663-017-1067-y

Article  PubMed  Google Scholar 

Martelli N et al (2016) Advantages and disadvantages of 3-dimensional printing in surgery: a systematic review. Surgery 159:1485–1500. https://doi.org/10.1016/j.surg.2015.12.017

Article  PubMed  Google Scholar 

Louvrier A et al (2017) How useful is 3D printing in maxillofacial surgery? J Stomatol Oral Maxillofac Surg 118:206–212. https://doi.org/10.1016/j.jormas.2017.07.002

Article  CAS  PubMed  Google Scholar 

Tejo-Otero A, Buj-Corral I, Fenollosa-Artés F (2020) 3D Printing in medicine for preoperative surgical planning: a review. Ann Biomed Eng 48:536–555. https://doi.org/10.1007/s10439-019-02411-0

Article  CAS  PubMed  Google Scholar 

Moe J et al (2021) An in-house computer-aided design and computer-aided manufacturing workflow for maxillofacial free flap reconstruction is associated with a low cost and high accuracy. J Oral Maxillofac Surg 79:227–236. https://doi.org/10.1016/j.joms.2020.07.216

Article  PubMed  Google Scholar 

Ganguli A et al (2018) 3D printing for preoperative planning and surgical training: a review. Biomed Microdevices 20:65. https://doi.org/10.1007/s10544-018-0301-9

Article  PubMed  Google Scholar 

Uygur EITU, Ozturan B, Poyanli O (2020) The role of 3D modeling in education of orthopedic trainees for the treatment of foot deformities. Acta Chir Orthop Traumatol Cech 87, 346–349

Pugliese L et al (2018) The clinical use of 3D printing in surgery. Updates Surg 70:381–388. https://doi.org/10.1007/s13304-018-0586-5

Article  PubMed  Google Scholar 

Weidert S et al (2019) 3D printing in orthopedic and trauma surgery education and training : Possibilities and fields of application. Unfallchirurg 122:444–451. https://doi.org/10.1007/s00113-019-0650-8

Article  PubMed  Google Scholar 

Lioufas PA, Quayle MR, Leong JC, McMenamin PG (2016) 3D printed models of cleft palate pathology for surgical education. Plast Reconstr Surg Glob Open 4:e1029. https://doi.org/10.1097/gox.0000000000001029

Article  PubMed  PubMed Central  Google Scholar 

Abo Sharkh H, Makhoul N (2020) In-house surgeon-led virtual surgical planning for maxillofacial reconstruction. J Oral Maxillofac Surg 78:651–660. https://doi.org/10.1016/j.joms.2019.11.013

Article  PubMed  Google Scholar 

Thienpont E, Quaglio G, Karapiperis T, Kjaersgaard-Andersen P (2020) Guest editorial: new medical device regulation in Europe: a collaborative effort of stakeholders to improve patient safety. Clin Orthop Relat Res 478:928–930. https://doi.org/10.1097/CORR.0000000000001154

Article  PubMed  PubMed Central  Google Scholar 

Byrne RA (2019) Medical device regulation in Europe - what is changing and how can I become more involved? EuroIntervention 15:647–649. https://doi.org/10.4244/EIJV15I8A118

Article  PubMed  Google Scholar 

Meglioli M, Naveau A, Macaluso GM, Catros S (2020) 3D printed bone models in oral and cranio-maxillofacial surgery: a systematic review. 3D Print Med 6:30. https://doi.org/10.1186/s41205-020-00082-5

Article  PubMed  PubMed Central  Google Scholar 

Pabst A et al (2021) How is neck dissection performed in oral and maxillofacial surgery? Results of a representative nationwide survey among university and non-university hospitals in Germany. Clin Oral Investig, https://doi.org/10.1007/s00784-020-03622-9

Pabst A et al (2021) 3D printing in oral and maxillofacial surgery: a nationwide survey among university and non-university hospitals and private practices in Germany. Clin Oral Investig, https://doi.org/10.1007/s00784-021-04073-6

Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM (2014) Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem 86:3240–3253. https://doi.org/10.1021/ac403397r

Article  CAS  PubMed  Google Scholar 

Hughes B, Wilson G  (2015) 3D/additive printing manufacturing: a brief history and purchasing guide. 75, 18–21

Seifert LB et al (2020) 3D printed patient individualised models versus cadaveric models in an undergraduate oral and maxillofacial surgery curriculum: comparison of students’ perceptions. Eur J Dent Educ 24:809–810. https://doi.org/10.1111/eje.12550

Article  PubMed  Google Scholar 

Werz SM, Zeichner SJ, Berg BI, Zeilhofer HF, Thieringer F (2018) 3D printed surgical simulation models as educational tool by maxillofacial surgeons. Eur J Dent Educ 22:e500–e505. https://doi.org/10.1111/eje.12332

Article  CAS  PubMed  Google Scholar 

Kim PS et al (2019) Obtaining informed consent using patient specific 3D printing cerebral aneurysm modeL. J Korean Neurosurg Soc 62:398–404. https://doi.org/10.3340/jkns.2019.0092

Article  PubMed  PubMed Central  Google Scholar 

Zhuang YD et al (2019) Effectiveness of personalized 3D printed models for patient education in degenerative lumbar disease. Patient Educ Couns 102:1875–1881. https://doi.org/10.1016/j.pec.2019.05.006

Article  PubMed  Google Scholar 

Jacobs CA, Lin AY (2017) A New Classification of three-dimensional printing technologies: systematic review of three-dimensional printing for patient-specific craniomaxillofacial surgery. Plast Reconstr Surg 139:1211–1220. https://doi.org/10.1097/PRS.0000000000003232

Article  CAS  PubMed  Google Scholar 

Honigmann P et al (2021) In-hospital 3D printed scaphoid prosthesis using medical-grade polyetheretherketone (PEEK) biomaterial. Biomed Res Int 2021:1301028. https://doi.org/10.1155/2021/1301028

Article  CAS  PubMed  PubMed Central  Google Scholar 

Hull CW (1984) Apparatus for production of three-dimensonal objects by stereo thography. 19 2,908,54510/1

Auhl, Dietmar Rohnstock, Falk Löschke, Oliver Schäfer, Konstanze Wang, Peng Wagner, Manfred H (2019) 3D-printing quality in relation to melt flow and fusion behavior of polymer materials2107:030004. https://doi.org/10.1063/1.5109498

van Noort R (2012) The future of dental devices is digital. Dent Mater 28:3–12. https://doi.org/10.1016/j.dental.2011.10.014

Article  PubMed  Google Scholar 

Wickramasinghe S, Do T, Tran P (2020) FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments. Polymers (Basel) 12, https://doi.org/10.3390/polym12071529

Msallem B et al (2020) Evaluation of the dimensional accuracy of 3D-printed anatomical mandibular models using FFF, SLA, SLS, MJ, and BJ printing technology. J Clin Med 9, https://doi.org/10.3390/jcm9030817

Seifert LB et al (2020) 3D-printed patient individualised models vs cadaveric models in an undergraduate oral and maxillofacial surgery curriculum: Comparison of student's perceptions. Eur J Dent Educ, https://doi.org/10.1111/eje.12522

Msallem B, Beiglboeck F, Honigmann P, Jaquiéry C, Thieringer F (2017) Craniofacial reconstruction by a cost-efficient template-based process using 3D printing. Plast Reconstr Surg Glob Open 5:e1582. https://doi.org/10.1097/gox.0000000000001582

Article  PubMed  PubMed Central  Google Scholar 

Laneve E et al (2019) Sterilisation in dentistry: a review of the literature. Int J Dent 2019:6507286. https://doi.org/10.1155/2019/6507286

Article  PubMed  PubMed Central  Google Scholar 

Rutala WA, Weber DJ (1998) Clinical effectiveness of low-temperature sterilization technologies. Infect Control Hosp Epidemiol 19:798–804. https://doi.org/10.1086/647730

Article  CAS  PubMed  Google Scholar 

Rutala WA, Weber DJ (2004) Disinfection and sterilization in health care facilities: what clinicians need to know. Clin Infect Dis 39:702–709. https://doi.org/10.1086/423182

Article  PubMed  Google Scholar 

Bank TL et al (2008) Effects of gamma-sterilization on the physico-chemical properties of natural sediments. Chem Geol 251:1–7. https://doi.org/10.1016/j.chemgeo.2008.01.003

Article  CAS  Google Scholar 

Tallarico M et al (2021) In vitro evaluation of bioburden, three-dimensional stability, and accuracy of surgical templates without metallic sleeves after routinely infection control activities. Clin Implant Dent Relat Res. https://doi.org/10.1111/cid.12986

Torok G