記住我
ORIGINAL ARTICLE
Year : 2023 | Volume
: 18
| Issue : 1 | Page : 1-15
Sub-cellular sequestration of alkaline drugs in lysosomes: new insights for pharmaceutical development of lysosomal fluid
Malaz Yousef1, Tyson S Le2, Jieyu Zuo2, Chulhun Park3, Nadia Bou Chacra4, Neal M Davies2, Raimar Löbenberg2
1 Faculty of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Alberta, Canada.; Faculty of Pharmacy, University of Khartoum, Khartoum, Sudan., Sudan
2 Faculty of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Alberta, Canada., Canada
3 College of Pharmacy, Jeju National University, Jeju 63243, South Korea., South Korea
4 Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, Brazil., Brazil
Correspondence Address:
Neal M Davies
Faculty of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Alberta, Canada., Tel: +1-7802210828, Fax: +1-7804921217
Canada
Raimar Löbenberg
Faculty of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Alberta, Canada., Tel: +1-7804921255, Fax: +1-7804921217
Canada
Source of Support: None, Conflict of Interest: None
CheckDOI: 10.4103/1735-5362.363591
Background and purpose: Lysosomal-targeted drug delivery can open a new strategy for drug therapy. However, there is currently no universally accepted simulated or artificial lysosomal fluid utilized in the pharmaceutical industry or recognized by the United States Pharmacopeia (USP).
Experimental procedure: We prepared a simulated lysosomal fluid (SLYF) and compared its composition to a commercial artificial counterpart. The developed fluid was used to test the dissolution of a commercial product (Robitussin®) of a lysosomotropic drug (dextromethorphan) and to investigate in-vitro lysosomal trapping of two model drugs (dextromethorphan and (+/-) chloroquine).
Findings/Results: The laboratory-prepared fluid or SLYF contained the essential components for the lysosomal function in concentrations reflective of the physiological values, unlike the commercial product. Robitussin® passed the acceptance criteria for the dissolution of dextromethorphan in 0.1 N HCl medium (97.7% in less than 45 min) but not in the SLYF or the phosphate buffer media (72.6% and 32.2% within 45 min, respectively). Racemic chloroquine showed higher lysosomal trapping (51.9%) in the in-vitro model than dextromethorphan (28.3%) in a behavior supporting in-vivo findings and based on the molecular descriptors and the lysosomal sequestration potential of both.
Conclusion and implication: A standardized lysosomal fluid was reported and developed for in-vitro investigations of lysosomotropic drugs and formulations.
Keywords: Biological fluids; CADs; Lysosomal trapping; Simulated lysosomal fluid.
Intracellular sequestration of drug molecules by various organelles has differential effects on the disposition of xenobiotics which can impart significant alterations to their distribution, efficacy, and safety [1],[2]. Moreover, this phenomenon can also yield unintentional targets for molecules which may help in repurposing them for indications that involve initially an off-target site of action [3],[4],[5]. Previous studies listed lysosomes, mitochondria, and Golgi apparatus as intracellular sites for various drug entities [1],[6],[7]. In these investigations we highlight lysosomal trapping, focusing on the structure and function of the lysosomes and the mechanism of “trapping” potential drugs in addition to the therapeutic implications of this phenomenon. We will also detail the various physicochemical and structural properties that candidate molecules possess to be subjected to sub-cellular sequestration in lysosomes and the models used to predict this occurrence.
Lysosomes structure and function
Lysosomes are acidic membrane-enclosed organelles (pH 4 - 5.5) [8],[9]. They are ubiquitous in cells, yet predominant in the liver, kidney, spleen, and lung [10]. Their size can differ in the various tissues, ranging from 0.1 to 1.2 μm [11].
Lysosomes are essential in certain metabolic processes including the digestion of macromolecules and cell fragments, phospholipid turnover, and destroying invading bacteria and viruses [1],[12],[13]. Lysosomes play this key role through their array of hydrolytic enzymes (> 60) that function within the acidic environment of the lysosomes, which protects other cell molecules and organelles from being destroyed if these enzymes were able to leak into the cytosol [10],[14].
To maintain their acidic pH, lysosomes depend on proton-pumping V-type ATPase complexes that utilize the energy of ATP hydrolysis in transporting the protons from cytosol into lysosomes [15]. As the parallel influx of anions is essential for electro-neutrality, chloride proton antiporter, known as chloride channel-7 or ClC-7, moves chloride ions into lysosomes to dissipate the transmembrane voltage [15],[16]. Cation efflux into the cytosol has also been reported to play a role in preserving a steady-state pH inside the lysosomes [16].
Mechanism of lysosomal trapping
In 1974 Duve et al. first described drug sequestration in the acidic lysosomal vicinity via a process known as lysosomal trapping, lysosomal sequestration, lysosomotropism, acid trapping, or proton pump effect [13],[17],[18].
Lipophilic basic drugs were suggested to be the targets for this process [18],[19]. However, not all basic drugs have the requisite characteristics to be possible candidates for lysosomal trapping. It is the physicochemical properties of the drugs that determine the accumulation propensity in the lysosomal organelles. Lysosomotropic drugs are termed cationic amphiphilic drugs, referring to their nature being relatively lipophilic (log P ~ 2 - 6) and can bear a positive charge (pKa > 6) [13].
The pH gradient between cytosol (pH 7 - 7.2) and lysosomes represents the driving force for the candidate drugs’ deposition into lysosomes [1]. Uncharged basic molecules can passively diffuse into lysosomes and their basic group(s) are protonated in the acidic lysosomal vicinity. Ionized charged molecules cannot easily permeate biological membranes, thus the acquired charges reduce the permeability of the molecules across the lipid bilayer lysosomal membrane back to the cytosol. The equilibrium between the protonated and the neutral forms favors the former and consequently leads to a high fraction of the drug being “trapped” as depicted in [Figure 1] [1],[2],[10]. The percentage of drugs in the lysosomes can reach up to 70% of the total amount of the drug in the intracellular vicinity [3].
Figure 1: Illustration showing the lysosomal trapping of basic drug molecules.Effects of lysosomal trapping
Drug action and disposition implications of lysosomal trapping mark both the pharmacodynamics and pharmacokinetic properties of drugs [2],[20]. For certain molecules, it can be beneficial if the drug target is sequestered inside the lysosomes. Trapping of the antimalarial drug, chloroquine, inside the parasites’ lysosome (food vacuole) is fortuitous as this drug binds the heme part of the hemoglobin which is usually metabolized by the parasite to the non-toxic form, hemozoin. Prevention of this process by chloroquine would lead to the death of the parasite in its own waste from the hemoglobin metabolism [21],[22],[23].
Additionally, inhibition of the intralysosomal enzyme acid sphingomyelinase is one way through which certain antidepressants elicit their pharmacological action. Thus, lysosomal trapping of fluoxetine and amitriptyline which happens because of their physicochemical properties aids in their pharmacological action as well [24],[25]. Lysosomal trapping can also prolong the availability of the drug and in doing so potentiate its activity as seen with the anticancer drug palbociclib and others [5],[26]. Palbociclib is an anticancer drug with a mechanism of action that relies primarily on inducing cell-cycle arrest and senescence [27]. The process of lysosomal sequestration and release of palbociclib facilitates an increase in the exposure time of the drug and extends the duration of the effect. In addition, the lysosomal trapping of palbociclib can occur in both responsive and resistant cancer cells, the latter effect, however, was found to accumulate and release the drug inducing its paracrine senescence effect (a stable arrest mediated by secreted factors). Moreover, the displacement of palbociclib by other lysosomotropic drugs into the cytosol potentiates its action on cytosolic and nuclear targets [26].
Together with the endosomes (membrane- formed-vacuoles), lysosomes play a major role in viral replication [3]. Therefore, lysosomotropic drugs have also been investigated to be potentially repurposed and therapeutically utilized for their antiviral properties [28]. Several research investigations support the use of lysosomotropic drugs as antiviral agents as demonstrated through in-vitro, in-vivo, and clinical data. Ebola, Zika, influenza, and even coronavirus are examples of the targets for which lysosomotropic drugs are being investigated [3],[4],[28],[29],[30]. [Table 1] lists examples of different lysosomotropic drugs which have been reported to have antiviral activity.
Table 1: Examples of some antiviral lysosomotropic agents from various drug classes.Nevertheless, lysosomal trapping can also have negative effects on the efficacy of drugs by impeding and decreasing their therapeutic concentration in their intended sites of action. Such effects have been linked to crossresistance of lysosomotropic drugs and might even result in drug resistance as in the case of some anticancer drugs [41],[42],[43]. An example of lysosomotropic drug-induced resistance has been reported with sunitinib [13]. This cytotoxic agent can trigger lysosomal biogenesis which can result in increased lysosomal sequestration and inadequate target exposure following treatment with lysosomotropic anticancer agents including sunitinib [44].
Excessive accumulation of phospholipids as a result of drug hindrance of their degradation is known as drug-induced phospholipidosis [45]. Most of the drugs that have been reported to cause this pathological implication (> 50) are lysosomotropic drugs (cationic amphiphilic drug s) [46]. Examples of which are collated in [Table 2]. These molecules can be protonated to yield cationic species that when bonded with the phospholipid bilayer of the lysosomal membrane alter its surface charge and subsequently lead to the slowing of phospholipid degradation, which results in their lysosomal accumulation [46],[53].
Models for lysosomal trapping
Models describing the intracellular localization of drugs are not only helpful when it comes to interpreting experiments; they are also useful in rational drug design. Approaches that consider quantitative structure-activity relationships (QSAR) have been widely used to forecast the movement of molecules within the different intracellular compartments including lysosomes [1]. Due to increased interest in lysosomal trapping, several in-silico and in- vitro models have been proposed.
Fluorescent lipophilic amines such as LysoTracker Red were used to evaluate the lysosomal sequestration in in-vitro cell lines including rat and human hepatocytes [2],[13]. The compounds that inhibit the fluorescence of these marker compounds in a concentration-dependent manner are considered lysosomotropics [2],[54]. This method succeeded in predicting many possible lysosomotropic agents yet failed at determining known lysosomotropic drugs like dextromethorphan and labetalol [13].
Nigericin, monensin, and ammonium chloride are known as inhibitors of lysosomal trapping [54]. The first two inhibitors interfere with the proton pump presenting in the lysosomes, thus disrupting the pH of lysosomal fluid and ammonium chloride achieves a similar effect by increasing the pH via buffering [13]. If the cellular portioning of the tested compounds decreases with the addition of inhibitors, this indirectly confirms categorizing the investigated drugs under lysosomotropic as reported in some papers [13],[20],[55].
Effects of drug trapping on the intra-lysosomal processes have also been used to predict possible lysosomotropic drugs. The degree of phospholipidosis induction was strongly correlated with lysosomal trapping through a study that involved 47 potential compounds. A similar correlation was undertaken for the phenomenon of lysosomal swelling [56]. Inhibition of autophagy can similarly result from lysosomal trapping as previously mentioned and was reported to correlate with the concentrations of drugs accumulating in the lysosomes. However, the study was conducted on a smaller group of drugs including lysosomotropic drugs such as astemizole, chlorpromazine, and (+/-) chloroquine among others [3],[56],[57],[58].
Trapp et al. designed an in-silico cell model to predict the distribution of weakly basic drug moieties inside the cell. The model is composed of a cell comprising cytosol, lysosome, and mitochondria; each is contained by a membrane and has both an aqueous and a lipid portion. The Fick-Nernst-Planck equation was utilized to calculate the chemical potential-driven flux of the molecules across the electrically charged membranes. It evaluated the ionization status of the different molecules tested via this model. Neutral and ionic molecules across the membrane model were examined for ten model antimalarial drugs whose simulation results anticipated that six of them are optimum for the lysosomal trapping and three were close to the optimum. The results suggested specific physicochemical criteria for potential excellent candidates for lysosomal trapping. These properties included a pKa range of (6 - 10), with a logP of (0 - 3) for monovalent bases, whereas for the bivalent bases, pKa values of below 10 for the higher pKa (pKa 1) and above 4 for the lower pKa (pKa 2) and a LogP of 3 - 6 are optimum for lysosomotropism [1].
Another in-silico tool that could potentially predict lysosomal trapping is Membrane Plus™ which is a software developed by Simulations Plus, Inc. (California, USA) for modeling in- vitro drugs permeability using different cell types (e.g. human colorectal adenocarcinoma cells (CaCo-2), Madin-Darby canine kidney cells (MDCK)) and parallel artificial membrane permeability assay (PAMPA). As there is no reported data on lysosomal trapping using Membrane Plus™, it was used to estimate the lysosomal trapping of the lysosomotropic drugs listed in [Table 1] and [Table 2] in addition to other molecules mentioned throughout the paper (the method is detailed in the Materials and Methods section). The obtained data is depicted in [Figure 2]. Some drugs, namely, the four quinolines; (+/-) chloroquine, (+/-) hydroxychloroquine, (+/-) amodiaquine (+/-), and quinacrine had high lysosomal trapping percentages predicted (88.6, 85.4, 74.7, and 88.6, respectively) while the highest percentage for other drugs was 7% for astemizole. Some other well-known lysosomtropics like (+/-) fluoxetine and (+/-) propranolol were not predicted to be trapped in lysosomes to a significant extent and had only 1.7% and 1.9% trapped predicted within lysosomes, respectively. In our attempts to modify the main input parameters (pKa and log P) for the lysosomotropic drug, dextromethorphan, that has been used in some of the reported experiments in this work we could only obtain the percentage of 4.9% predicted by this modeling methodology.
Figure 2: Percentage of lysosomal trapping of different lysosomtropic drugs (100 uM) predicted by Membrane Plus™ 2.0 (Simulations Plus, Inc., California, USA) in Caco-2 cells. Default values for the cell model were used with a cytosol pH of 7.22 and lysosomes pH of 4. All properties were calculated by ADMET Predictor 8.1 (Simulations Plus, Inc., California, USA).Generally, lysosomes are fragile organelles, which can make it challenging to quantify the compounds trapped inside them [10]. The in-vitro cellular models avoid the poor recovery challenge and the drug diffusion during sample preparation [59].
They are also superior to the in-silico models based on their better resemblance to the in-vivo conditions. However, all models have so far been unable to accurately predict every lysosomotropic drug as they depend on indirect methods to quantify the lysosomotropic agents.
The in-silico models are at times limited by being incapable of fully replicating what is occurring biologically in the living cells, which is sometimes due to the uncertainty related to the accuracy of the underlying model parameter inputs. Additionally, such models might not consider non-linear processes such as transporter saturation. The effects of the trapped drugs on the lysosome’s membranes, intracellular, and intra-organelle environment properties need to be more holistically integrated into the algorithms or the differential equations that underlie the in-silico models. The ionic strength effect on pKa has not been considered in some in-silico models and this may affect the accuracy of an important molecular descriptor that determines the lysosomal trapping tendency.
Lysosomal fluid
In the field of pharmaceutical sciences, lysosomal targeted drug delivery could be designed ab initio for drug therapy and this approach has potential pharmacokinetic and therapeutic benefits. However, there currently is no universally accepted simulated or artificial lysosomal fluid utilized in the pharmaceutical industry or published by the United States Pharmacopeia. There is at least one commercially available artificial lysosomal fluid sold by Biochemazone (www.biochemazone.com). Biochemazone produces commercially available artificial lysosomal fluid BZ257. This formulation is proprietary although it has been communicated that the use of HCl/acetic acid is employed to maintain acidic pH.
The importance of standardized and physiologically relevant simulated fluids for use in biopharmaceutics and dissolution has been highlighted in many excellent articles and reviews [60],[61]. However, there is no mention of a general or optimal lysosomal fluid in these publications for pharmaceutical investigations. The reported lysosomal fluids (artificial lysosomal fluid and phagolysosomal fluid) are categorized under simulated lung fluids [62],[63],[64],[65],[66]. The former simulated conditions occurring in conjunction with phagocytosis by cells [62], while the latter is a potassium hydrogen phthalate buffered solution that represents the medium inside the phagolysosomes (compartments form after fusion of alveolar macrophages and lysosomes when encountering a foreign particle) [63]. [Table 3] details the composition of each fluid.
Table 3: The concentration of various constituents in artificial lysosomal fluid reported in the biomedical literature.Apart from inhalable formulations investigated with the reported lysosomal fluids, the bioaccessibility of lysosomotropic drugs in preparations intended for other routes of administration must also be considered. Lysosomal sequestration, in general, can dem on strate various therapeutic advantages as illustrated in the earlier section-- “Effects of lysosomal trapping”. Additionally, enterocyte and hepatocyte lysosomal trapping can have a profound impact on the pharmacokinetics of a lysosomotropic compound, resulting in a delay in drug input into the systemic vasculature and thus retarded appearance in the plasma [67].
Furthermore, ophthalmological lysosomal trapping within the retinal blood barrier has been suggested to be a part of novel transport systems that could safely and effectively deliver candidate drugs to treat retinal dysfunction [68]. Development and standardization of a simulated lysosomal fluid (SLYF) would be an essential contribution to pharmaceutical drug and formulation development and aid standardization of in-vitro studies for lysosomotropic drugs and their formulations. Based on literature reports on the principal ions responsible for lysosomal hemostasis and their concentrations [69], a facile SLYF was developed for routine pharmaceutical use. Selected representative drugs that trap within lysosomes were identified using in-silico modeling and a review of the literature and solubility and dissolution were examined.
Materials and methodsMaterials
Sodium Chloride (NaCl, CAS: 7647-15-5), potassium chloride (KCl, CAS: 7447-40-7) and sodium acetate (CH3COONa, CAS: 127-09-3) were obtained from Caledon Laboratories (Ontario, Canada) while the calcium chloride dihydrate (CaCl2.2H2O, CAS: 10035-04-8) was from Sigma (Steinheim, Germany) and the acetic acid (CH3COOH, CAS:64-19-7) was purchased from Fischer Scientific, USA. Distilled water was used for dissolving the reagents. Dextromethorphan hydrobromide (CAS: 6700-34-1) and chloroquine diphosphate (CAS: 50-63-5) were obtained from Sigma- Aldrich Co. (Missouri, USA) whereas the dextromethorphan soft gel capsules (Robitussin®) were a product of Pfizer (Ontario, Canada) from the lot: DP5155 (Expiration Date: 02/2023).
Using Membrane Plus for lysosomal trapping via CaCo-2 permeability model
Membrane Plus™ 2.0 from Simulations Plus, Inc. (California, USA) was used to estimate the lysosomal trapping of the potential lysosomotropic. The molecular structure of these drugs was imported into the Caco-2 12-well model. Properties of drugs were predicted by absorption, distribution, metabolism, excretion, and toxicity (ADMET) Predictor 8.1 [Table 4].
Table 4: List of the tested drugs via Membrane Plus™ with their log P and PKa values as predicted by ADMET Predictor 8.1 and used by Membrane Plus™ 2.0 (Simulations Plus, Inc., California, USA).The apical compartment of the model was chosen to be filled with 0.5 mL of the drug solution (100 μΜ, pH = 7.4) while the basolateral one was filled with 1.5 mL of buffer solution (pH = 7.4). The default data for the membrane thickness and pore size were used at a shaking rate of 100. Sampling was done at 0.25, 0.5, 1, 1.5, and 2 h. Default values for the cell model were considered with a cytosol pH of 7.22 and lysosomal pH of 4. The obtained values for the lysosomal trapping percentages for the tested drugs were noted.
Preparation of the SLYF
The fluid was prepared with the components listed in [Table 5]. Components were added successively and dissolved in 70 mL water, and then HCl was used to adjust the pH before completing the volume to 100 mL.
Table 5: Simulated lysosomal fluid composition for pharmaceutical investigations.Analysis of the developed lysosomal fluid and a commercial artificial fluid
The laboratory-prepared lysosomal fluid (SLYF) and the commercial artificial fluid (BZ257, Biochemazone, Alberta, Canada) were examined for their composition and pH as follows.
pH determination
The pH of the fluids was determined via Fischer Scientific XL20 pH/conductivity meter (Massachusetts, USA).
Chemical analysis
The lysosomal fluids were chemically investigated using Medica’s EasyRA® analyzer (Massachusetts, USA). They were analyzed for their content of potassium (K+), sodium (Na+), calcium (Ca2+), and chloride (Cl-) ions, in addition to lithium (Li+), magnesium (Mg++), and total protein. After checking and calibrating the system, the probe and the ion"selective electrode were cleaned and the latter was calibrated. A properly calibrated reagent for each component was put with a blank (high" performance liquid chromatography (HPLC)- grade water) in the sample holder with 2000 pL samples of the SLYF and the commercial artificial fluids. The required components were selected and the analysis was run for their concentration in blank and fluids samples.
Measuring the solubility of dextromethorphan in SLYF and the commercial artificial fluid
The solubility of the model lysosomotropic dextromethorphan was tested in both fluids using the shake-flask method (70). In brief, the excess drug was weighed into 2 mL samples of SLYF and the commercial lysosomal fluid, then they were shaken at room temperature for 24 h. Subsequently, samples from the supernatant were filtered through 0.45 μm nylon filters before being analyzed at 230 and 280 nm using HPLC C18 (4.6 × 250 mm × 5 μm) column that utilized 60:40 methanol and phosphate buffer (pH = 5.5) as a mobile phase at a rate of 0.8 mL/min for a run time of 10 min.
Measuring the dissolution and release profile of dextromethorphan from the commercial product Robitussin®:
[Table 6] lists the main components in the liquid-filled dextromethorphan capsules (Robitussin DM Coughgels). In-vitro dissolution profiles for this were conducted via VK 7000, USP 711 apparatus by VanKel® (Varian Inc, USA) in 900 mL of 0.1 N HCl, SLYF fluid and 0.05 M phosphate buffer (pH = 7.4), using a USP type I basket method dissolution apparatus. A temperature of 37 ± 0.5 °C and a rotation speed of 100 rpm were maintained according to USP dissolution methods (USP34NF29). Three mL samples were withdrawn over a period of 60 min at predetermined time intervals (15, 30, 45, and 60 min). The filtered samples were suitably analyzed using the HPLC procedure described in the previous section.
Using the developed fluid (SLYF) in predicting lysosomal trapping
Hydrophilic synthetic 0.22 μm polyvinylidene fluoride membranes were first immersed in the developed lysosomal fluid (SLYF) for 10 min and the excess media was removed using absorbent tissues. The membrane was then placed between the two compartments of a horizontal Franz-cell [Figure 3]. The receptor compartment was filled with 20 mL of the SLYF (pH = 4.21), whereas the donor compartment was filled with 20 mL of the drug solution (1 mg/mL) in phosphate buffer (pH = 7.2). Both compartments were magnetically stirred at 600 rpm throughout the experiment. At time points (1, 2, 3, 4, and 24 h), 400 μL aliquots were withdrawn from the receiver compartment and replaced immediately with an equal volume of fresh receptor medium to maintain a constant volume of the receiving solution. Analysis of both drugs was done using the same HPLC system. For chloroquine, the detection was done at 342 nm using a mobile phase of 60% methanol and 40% acetate buffer (pH = 5.8) that was run at the rate of 1 mL/min for 10 min.
Figure 3: Schematic representation of the developed lysosomal trapping apparatus. *PVDF, Polyvinylidene fluoride. Results The pH of the commercial artificial lysosomal fluid was determined to be 7.51, while that of SLYF fluid was 4.2. The chemical analysis of the constituents of both SLYF and the commercial lysosomal fluid for the essential ions for lysosomal function are depicted in [Table 7] along with the reported reference values of the tested components. The commercial artificial lysosomal fluid contained only the potassium concentration within the optimum range, while the sodium, calcium, and chloride were all out of range. Moreover, similar to the SLYF fluid, the commercially purchased fluid had no lithium yet contained 1.9 mg/dL of magnesium and a total protein of 2 g/L.
Table 7: Results of Analysis of the simulated lysosomal fluid and a commercial artificial lysosomal fluid using Medica’s EasyRA® Analyzer (Massachusetts, USA) with the reference values of each component as adopted from literature.The solubility testing of dextromethorphan in both fluids yielded a clear solution with the SLYF, while the artificial commercial fluid produced a turbid sample with a precipitate [Figure 4]. The average solubility values of the dextromethorphan in the commercial artificial fluid and the SLYF were 1.3 mg/mL and 4.9 mg/mL, respectively [Figure 5]. [Figure 6] depicts the drug’s rate and extent of release was different in the three dissolution media; 0.1 N HCl, SLYF, and phosphate buffer (pH = 7.4). The highest release values were in 0.1 N HCl (> 97%) followed by SLYF (72.6%) and then the phosphate buffer in which only about 32% of the drug was released into.
Figure 4: Images of samples of the solubility test of the model drug dextromethorphan in the laboratory prepared lysosomal fluid (SLYF) where it fully dissolved (right) and in the commercial artificial counterpart where the fluid was turbid with a precipitate formed (left).
Figure 5: Solubility of dextromethorphan in SLYF and in the commercial artificial fluid. Data are presented as mean ± SEM, n = 3. SLYF, laboratory-prepared simulated lysosomal fluid
Figure 6: Dissolution profile of dextromethorphan performed on the commercial product robitussin in 0.1 N HCl, developed simulated lysosomal fluid (SLYF), and phosphate buffer (pH = 7.4). Data are presented as mean ± SEM, n = 3.Using SLYF in the developed model to assess the lysosomal trapping of both chloroquine and dextromethorphan revealed that throughout the experiment the rate and extent of chloroquine release into the lysosomal compartment were higher than the other one as seen in [Figure 7].
Figure 7: Cumulative percentage of tested lysosomtropics ((+/-) chloroquine and dextromethorphan) in the receiver compartment of the model using the developed simulated lysosomal fluid (SLYF). Data are presented as mean ± SEM, n = 3. Discussion Lysosomal ionic hemostasis is crucial for its function. Sodium (Na+) and potassium (K+) ions are essential for determining lysosomal membrane potential that in turn affect the movement of the different ions across the lysosomal membrane and regulate lysosomal acidification. Calcium ions (Ca2+) efflux also contributes to lysosomal acidification and is linked to the fusion of lysosomes with other cellular parts. Chloride ions (Cl-) are critical counter ions for the chloride proton antiporter which is the main mean that maintains the acidic environment inside lysosomes. The optimal range of these ions inside lysosomes is listed in [Table 7]. In addition to the mentioned ions, micromolar deposits of other ions including iron (Fe3+ and Fe2+), zinc (Zn2+), and copper (Cu2+) are also found in lysosomes to be provided to the cell when required [69].
For SLYF preparation, only ions that are essential for the lysosomal internal hemostasis were selected. Sodium, potassium, and calcium chlorides were used to provide their corresponding chosen ions (Na+, K+, Ca2+, and Cl-). The equipped buffering system contained acetate and acetic acid (buffering range = 3.5-5.5) [71]. In addition to the acetic acid playing a part in decreasing the pH, HCl was used to adjust the pH to the required value.
The pH of the commercial fluid does not reflect the pH inside the lysosomes that should be maintained within 4 - 5.5 [1]. Yet, the pH of SLYF does reside within the range. Additionally, the results showed that concentrations of all SLYF components complied with reported data in the literature, unlike the commercial fluid in which only potassium values were optimized.
The improved solubility of the selected model drug in the SLYF could be attributed to the pH of the fluid (4.21) and the pKa of the drug (9.8) [72]. However, the discrepancy in the solubility data poses a challenge when considering pharmaceutical or biochemical tests using simulated or artificial biological fluids such as the lysosomal fluid. It is also of special importance for the optimal dissolution conditions of lysosomotropic drug entities and their formulations.
Dextromethorphan’s rate and extent of release were different in the three dissolution media examined. The pH can be one factor to the faster release of the basic drug (pKa 9.85) in the 0.1 N HCl (pH = 1) than the SLYF fluid (pH = 4.2) and the phosphate buffer (pH = 7.4). Fluid composition could also be another factor affecting dissolution. However, even after 45 min, it was only the 0.1 N HCl medium that passed the acceptance criteria for the dextromethorphan dissolution testing of not less than 75% in 45 min in the specified dissolution medium. Other reports indicated the success of the different dextromethorphan dosage forms including capsules to pass the dissolution test in various media e.g. 0.1 N HCl, acetate buffer (pH= 4.5), and simulated intestinal fluid (SIF, pH = 6.8) [73],[74].
The developed lysosomal fluid also showed its usefulness in the model used to predict the lysosomal trapping of the two lysosomotropic; (+/-) chloroquine and dextromethorphan. The model was designed in a way to replicate the movement of drugs from the cytosol to lysosomes by having two compartments filled with representative media; a donor compartment in which the drug was dissolved in a phosphate buffer with a pH of 7.2 and a receiver one containing the simulated lysosomal fluid (pH = 4.21). The release profile into the receiver compartment which is an indicator for the lysosomal trapping demonstrated that chloroquine appeared in the SLYF at e.g. a greater rate and extent than dextromethorphan. That observation is reflected by physicochemical molecular descriptors of both drugs, namely the pKa and the log P which would favor chloroquine (pKa = 7.29 and 10.32 and LogP = 3.93) lysosomal trapping over that of the dextromethorphan (pKa = 9.85 and Log P = 3.49) [17]. Using this developed SLYF fluid as an in-vitro model to evaluate additional lysosomotropic or potentially lysosomotropic drugs.
ConclusionThe importance of lysosomes to drug action and disposition is well known. Several in-vitro models have been developed to assess lysosomal trapping and quantify the proportion of potential candidates that will be sequestered inside lysosomes. However, there is no standardized composition for lysosomal fluid. Therefore, we developed a lysosomal fluid with the basic components required for lysosomal hemostasis (SLYF fluid) and compared it to a commercial artificial lysosomal fluid. The laboratory-prepared fluid (SLYF fluid) complied with the reported data on the pH and the concentration of the lysosomal components. The obtained result helps fill the void with a lysosomal fluid that can be used to examine various factors related to pharmaceutical product performance including dissolution, solubility, and disposition which are relevant and necessary parts of drug and product development. Preliminary data from the developed fluid and model with dextromethorphan and (+/-) chloroquine suggest the pharmaceutical utility of this developed methodology. The obtained results and model system could be adapted to enable investigating the sequestration of drugs in other cellular organelles using a similarly developed experimental design approach.
Acknowledgments
This work was part of M. Yousef’s Ph.D. project funded by MITACS.
Conflict of interest statement
The authors declared no conflict of interest in this study.
Author's contribution
M. Yousef carried out the experiments with the help of T.S. Le, J. Zuo, and C. Park; N.B. Chacra, N.M. Davies and R. Löbenberg conceived the study and were in charge of work direction, experimental planning, and manuscript revisions and suggestions. The finalized article was approved by all authors.
References
留言 (0)